Galvanized sheet refers to a steel sheet with a layer of zinc on the surface. Galvanizing is a frequently used economical and effective rust prevention method, and about half of the world’s zinc production is used for this process.
- Scope:
This standard for galvanized sheet specifies the contact agent used in the hot-dip galvanizing drying process – zinc chloride + ammonium chloride (2 or 3 salt compounds). The supplier or manufacturer of the material shall meet the following requirements of this standard: - Process requirements: colorless or light yellow crystals. Grade: There are two grades to choose from; Standard: Standard plus wetting agent;
- Qualification certificate:
A certificate of conformity to this standard must be attached upon delivery.
The standard range of zinc-aluminum alloy materials is 1.
This standard specifies the zinc and aluminum ingots added to the zinc pool during hot-dip galvanizing, and the supplier or manufacturer of the material shall meet the following requirements of this standard. - Process requirements
2.1 Chemical composition
Aluminum = 4.5-5.0% Copper = maximum 0.001% Magnesium = 0.002% Lead = 0.003% Cadmium = maximum 0.003% Iron = maximum 0.002% Sh = 0.002%
2.2 Weight: about 9.5-10kg. - Approval certificate
Delivery must be accompanied by a certificate of conformity to this standard.