Products
28 Gauge Hot Dipped Roofing Sheet
The roof panel is located on the roof of the house and is generally made of metals such as aluminum, magnesium, manganese or alloys. It has good color and rich color selection, and is easy and quick to construct, earthquake-resistant, fireproof, rainproof, long life and maintenance-free.
Z180 G60 Zinc Coated Metal Corrugated Steel Sheet
Corrugated steel plate is made of thin steel plate stamping, and the surface is wavy. This structure makes the corrugated steel plate light and high-strength. It has good color and rich color selection. At the same time, it is convenient and quick to construct, earthquake-resistant, fireproof, rainproof, long life and maintenance-free.
Stainless steel sheet
Stainless steel is initially produced in slabs, which are then put through a conversion process using a Z mill, which converts the slab into coil prior to further rolling. These wide coils are typically made at around 1250mm (sometimes a little wider) and are known as ‘mill edge coils’. After the stainless steel roll is rolled flat, it becomes a stainless steel sheet(plate).
Color coated coil
Color-coated coils use hot-dip galvanized sheets, hot-dip galvalume sheets, electro-galvanized sheets, etc. as substrates. After surface pretreatment (chemical degreasing and chemical conversion treatment), one or several layers of organic coatings are coated on the surface, and then A product that is baked and solidified. Colored steel coils are named after being coated with organic coatings of various colors, referred to as color-coated coils.
Aluminum profile
Aluminum profile is a structural material made of aluminum alloy as the main raw material. It is the most widely used non-ferrous metal structural material in industry. Aluminum profiles have many advantages, such as high strength, light weight, good corrosion resistance, electrical and thermal conductivity. They are usually made through processes such as extrusion molding, and come in a variety of cross-sectional shapes, including solid, hollow and composite types.
Carbon steel sheet / plate
Carbon steel plate is a rectangular plate made of non-alloy material mainly composed of iron and carbon. In addition to carbon, it also contains a small amount of silicon, manganese, sulfur, phosphorus and other elements. The higher the carbon content, the better the hardness and the better the strength. Due to its good mechanical properties and plasticity, it is widely used in various fields.
Copper straight pipe
Copper tube is also called purple copper tube. A type of non-ferrous metal pipe, it is a pressed and drawn seamless pipe. Copper tubes have good electrical and thermal conductivity and are the main materials for conductive accessories and heat dissipation accessories of electronic products.
Galvanized coil
Galvanized coils are materials produced through a continuous hot-dip galvanizing process using hot-rolled steel strips or cold-rolled steel strips as the base plate. Hot-dip galvanized sheets are supplied as rectangular flat sheets after cross-cutting; hot-dip galvanized coils are supplied as rolls after being rolled. Their main characteristics are: strong corrosion resistance, good surface quality, conducive to deep processing, economical and practical, etc.
Aluminum plate
Aluminum plate refers to a rectangular plate rolled from aluminum ingots, which can be divided into pure aluminum plate and alloy aluminum plate. The aluminum content of pure aluminum plates reaches more than 99%. In addition to maintaining aluminum’s light weight, good thermal conductivity, electrical conductivity and corrosion resistance, it also has high ductility. Aluminum alloy aluminum plate alloys aluminum with other metals (such as copper, magnesium, manganese) to enhance its mechanical properties and strength.
Carbon steel coil
Carbon steel coil is a commonly used metal material with extensive applications in many fields. It has good mechanical and processing properties and is widely used in fields such as automobile manufacturing, shipbuilding, construction, and bridges.
Boiler vessel plate
Boiler plate is a hot-rolled medium-thick plate material used to manufacture superheaters, main steam pipes and boiler firebox heating surfaces. Since the boiler steel plate works under medium temperature (below 350oC) and high pressure, in addition to bearing high pressure, it is also subject to impact, fatigue load and water and gas corrosion. The performance requirements for boiler steel are mainly good welding and cold bending properties. Certain high temperature strength and resistance to alkali corrosion, oxidation, etc.
Carbon steel round seamless pipe
Carbon steel pipes are pipes made of carbon steel. They are one of the most commonly used metal materials and have good mechanical properties, processing properties and corrosion resistance. According to the production method, it can be divided into two types: seamless steel pipe and welded steel pipe.